6pc Advanced Million Color SMD LED Flexible Motorcycle Kit
Advanced Million Color Pods
1ft & 2ft Wiring Extensions
3ft & 5ft Wiring Extensions
3M® Adhesion Promoter
LEDGlow’s 6 Piece Advanced Million Color Motorcycle LED Light Kit utilizes ultra-bright,
surface mounted RGB LED technology allowing all the included color modes to be extremely
vibrant and bright. The LEDs featured in this motorcycle lighting kit are so remarkable
that even when looking directly at the flexible strips you cannot see that three
separate LEDs are used to make each individual solid color. This kit features a
total of 66 ultra-bright, surface mounted RGB LEDs housed in two 4 ½ inch, two 8
½ inch, and two 10 ½ inch flexible strips, and can be expanded to include up to
a total of 250 surfaced mounted RGB LEDs. These strips can also be cut to your desired
size for easy mounting in smaller locations. The included slim and easily hidden
control box features 15 dynamic solid color modes, 2 color cycle modes, 3 flashing
modes, and 1 fading mode all easily managed with the included wireless remote. Each
flexible strip features 4 feet of power wire and 3M tape allowing you to bend and
curve each strip to your desired mounting location. LEDGlow’s LED lights for motorcycles
include a one year limited warranty and free lifetime technical support.
LEDGlow’s Advanced Million Color 2 Foot Wire Extensions easily connect to the power
wires on your flexible SMD lighting strips.
Installing one of these wire extensions will give your lighting strip 6 feet
of power wire! This is perfect for larger bikes or lighting strips that are being
mounted in locations further away from your control box.
LEDGlow is now offering 3M™ Adhesion Promoter, which is a liquid primer that creates
an extra layer of adhesion between the LED strip and the mounting surface your bike when installing one
of LEDGlow’s Motorcycle Lighting Kits. Using this adhesion promoter is not required
for installation, but allows for a much stronger bond than simply installing the light
strip with the included 3M™ Tape on the lighting strip.
Motorcycle Lighting Kit Features:
- 66 Surfaced Mounted RGB LEDs
- Two 4 ½ Inch, Two 8 ½ Inch, and Two 10 ½ Inch Flexible Strips
- Slim, Easily Hidden Control Box
- 4 Button Wireless Remote
- 15 Solid Color Modes Include Blue, Red, Green, Pink, Purple, Teal, Orange, Aqua,
Yellow, Light Pink, Light Green, Light Purple, Cool Blue, Cool White & Warm White
- 2 Color Cycle Modes, 3 Flashing Modes, and 1 Fading Mode
- Strips are 1/8th Inch in Depth
- Expandable up to 250 RGB LEDs
- 4 Feet of Power Wire per Strip
- Strips can be Cut to Size
- Installation Hardware and Instructions
- One Year Limited Warranty
- Free Lifetime Technical Support
Product & Installation Videos
(Long Island, NY)
9/28/2015 5:46 PM
I got the 8-piece million color SMD and two pod lights for my 2016 Indian Dark Horse. It out so good I contacted customer support to see about adding more light under the fram and the front fender. VERY helpful and gave some good ideas. For the front and rear fenders, I put four strips and 1 pod each. The wires became ungainly so I voided the warranty. The key is to solder the connections and use waterproof shrink seals. As well, buy the 3M adhesive promoter and buy 3M self adhesive wire clips on Amazon. Don't cheap out here, you don't want a strip falling down and pulled into the wheel.
I already have my friend asking me to help him do his Dyna. I wish they let me post a picture. One of the best web experiences yet.