FREE SHIPPING ON ALL ORDERS OVER 50*
LEDGlow's 2pc LiteTrike® Advanced Million Color Wheel Well Lighting Kit can be easily added to your trike with the featured side mounting LED strips. This wheel well lighting kit was designed specifically for trikes and comes included with 2 wheel well lighting strips that feature 54 SMDs per strip, totaling 108 SMDs per add on kit! Each Advanced Million Color Trike Wheel Well Strip is 36 inches in length with 4ft of power wire that connects directly into the included 2pc wire harness. Installing each wheel well lighting strip is a breeze with the included 3M™ Tape and illuminates your vehicle's wheel well and tire for a unique, custom style. Each 2pc Wheel Well Lighting Strip set comes standard with free lifetime technical support and a one year limited warranty.
The included round, waterproof control box features 15 dynamic solid color modes, 2 color cycle modes, 3 flashing modes, and 1 fading mode all of which are easily selected with one of the two included wireless remotes. The automatic brake light feature illuminates all installed LEDs in red, mirroring the trike’s brake lights and safely signaling other motorists on the road. Pull the brake handle and the brake lights will instantly illuminate red LEDs throughout the lighting kit. This feature can be used whether the control box is powered on or off. To activate the function, install the blue wire from the control box into the trike’s brake signal wires.
LEDGlow is including two packets adhesion promoter that is used when mounting the wheel well lighting strips to your trike. Adhesion promoter is a primer that is used before mounting the strip and creates an extra layer of adhesion between the LED strip and your trike. This promoter is not required for installation, but gives additional strength to the already included 3M™ tape.